Dejar un mensaje
Dejar un mensaje
Si le interesan nuestros productos y desea obtener más información, deje un mensaje aquí y le responderemos lo antes posible.
entregar
Pigmentos de efectos especiales
Hogar Pigmentos de efectos especiales

Metallic Color Paste: Water, Solvent and Epoxy Grades

Metallic Color Paste: Water, Solvent and Epoxy Grades

Water-based, solvent-based and matte epoxy color pastes: which carrier your system takes, how to judge the addition level, and what each looks like cured.

  • Número de artículo :

    Metallic Luster Paste, water based — KT-66000J series; Metallic Luster Paste, solvent based — KT-D86011J series; Epoxy Resin Matte Paste, color — KT-D6413J series; Epoxy Resin Matte Paste, near-nude matte — KT-D70601J series
  • Efecto de color :

    Luster series — semi-transparent metallic, reads by reflection and shifts with viewing angle; Matte series — opaque solid color with a flat finish
  • Tamaño de partícula :

    Not specified in the current range documentation; state your target on enquiry
  • Composición :

    Pigment already wetted out and dispersed in a carrier — water for the water-based series, solvent for the solvent-based and matte series
  • Marca :

    Kolortek
  • Cantidad mínima de pedido :

    5 kg
  • Solicitud :

    Epoxy resin casting and wood-and-resin work; waterborne systems where the paste is used as supplied or thinned with water

A metallic color paste is a jar of pigment that has already been dispersed — wetted out and milled into a carrier before it reaches you. The carrier decides what you can do with it. Two jars can carry the same color name and still belong to different systems, so the carrier on the label matters more than the name on the lid.

What Comes in the Jar

Unscrew the lid and you find a paste, not a powder. It sits in the jar with a wet sheen across the surface, holds a peak where the scoop pulled away, and comes out on a spatula or a stick to be weighed straight into a batch.

That texture is the point. The pigment inside has already been wet out and dispersed into a carrier, so the step where you would normally run powder through a bead mill or a three-roll mill has been completed before the jar was filled. What arrives is a suspension you meter by weight and stir in.

What it is not: a concentrate you dilute to taste, or a universal tint that drops into anything. The liquid around the pigment is a specific carrier chosen for a specific resin system, and that liquid is what decides whether you can open the jar and use it, or whether it has to be blended into something else first.

Thirty opened jars of metallic color paste laid out on white, the spread of colors available in one carrier

Fig. 1 — Jars opened and laid out as a set on white; paste, not powder, in every one.

One open jar from above, the paste glossy and holding the wave left by the last scoop

Fig. 2 — Surface of a single jar: the wet gloss and the wave left by the last scoop.

 

 

First Question: Can You Use It Straight from the Jar

The answer depends on the carrier, and the two main groups split cleanly on exactly this point.

Water-based metallic luster grades can be used as supplied or thinned with water. You open the jar, stir, and add; dilution is optional and done with water alone, so there is no separate let-down step to plan around. If you are running a waterborne system, the jar is already the finished component.

Solvent-based grades are added into epoxy resin. They are not a stand-alone coating but an input to a resin batch — weighed in and mixed until the color is uniform through the pour. The epoxy matte grades go into the resin as well rather than over it. This means you cannot judge these by dipping a stick in the jar: the color you see wet is not the color you get until the paste is inside resin and cured.

That single difference decides a purchase more often than color does, because a jar that has to be let down is a different purchase from a jar that can go straight in. If you are pouring resin, the epoxy application listing under pigments for epoxy resin is organized by the system the paste belongs in rather than by color name.

Sixteen water-based metallic luster colors, each an open jar with its color name

Fig. 3 — Water-based metallic luster range laid out jar by jar.

Sixteen solvent-based metallic luster colors in open jars, overlapping names, different carrier

Fig. 4 — Solvent-based metallic luster range: overlapping color names, different carrier.

One jar splitting two ways, used as supplied on one path and blended into epoxy resin on the other

Fig. 5 — Where each carrier goes: used as supplied, or blended into the resin.

Second Question: What It Looks Like After Cure

Cure changes the appearance, and the two sides finish differently.

Metallic luster grades cure semi-transparent. The effect works by reflection rather than hiding power, so the surface underneath stays visible and the color shifts as the viewing angle moves. Over a dark pour the same paste reads deeper; over a pale one it reads lighter and more open. That interaction is what you are buying, and it needs a substrate worth showing — a clear or tinted cast, a clear coat, a surface with some depth in it.

Epoxy matte grades cure as opaque solid color. They cover what is beneath them instead of interacting with it, and the finish is flat rather than reflective. The luster side depends on depth underneath; the matte side depends on consistent film thickness, because coverage is what carries the color.

The two are not interchangeable inside one application. Choosing between them is choosing what the cured surface should do. To see the luster family inside finished castings before you commit, the pearlescent pigments for epoxy resin applications page shows the same effect in cured resin.

Sixteen epoxy resin matte colors in open jars, opaque and flat where the luster range is translucent

Fig. 6 — Epoxy resin matte range, jar by jar: opaque and flat.

Cured purple resin dice beside the open jar of paste they were cast from

Fig. 7 — Cured purple dice beside the jar they came out of.

Third Question: How Much to Add

No addition percentage is quoted here, because the right figure depends on your resin, your film thickness and the depth of color you are aiming for. What can be given is the method.

Start small. Add a weighed portion to a small weighed batch, mix until it is uniform, and cure a sample. Judge the cured piece, not the wet mix — a wet stirred batch always looks stronger than the finished cast.

Read coverage first. If the cured sample still shows the substrate where you wanted hiding, add and repeat. If it has gone heavier than intended, you have found the ceiling for that batch and can step back on the next one.

If something goes wrong in cure — soft patches, uneven hardening, a surface that stays tacky — check the addition level and the mixing uniformity before you suspect the paste. An overloaded or poorly blended batch behaves like a resin problem, and usually is one. If you would rather control loading from the pigment end, metallic pigment color powder solutions is the alternative route, with the dispersion step back on your side.

Which Paste Goes Where

The range separates along carrier and finish, not along color. Read down the carrier column first; the color comes second.

Family Carrier How it is used
Metallic Luster Paste, water based Water Used as supplied, or thinned with water. Semi-transparent metallic effect in waterborne systems.
Metallic Luster Paste, solvent based Solvent Added into epoxy resin. Semi-transparent metallic effect, mixed into the batch.
Epoxy Resin Matte Paste, color Solvent Added into epoxy resin. Opaque solid color, matte finish.
Epoxy Resin Matte Paste, near-nude matte Solvent Added into epoxy resin. Opaque near-nude tone, matte finish.

The metallic luster side is a single effect with two carriers, listed under the metal luster series; the broader effect category sits under pearlescent pigments if you want to compare a paste against a powder of the same character.

Wood and resin cast pieces in blue, gold and amber, the effect read through cured depth

Fig. 8 — Wood-and-resin pieces cast with paste from the range.

Ordering

Minimum order is 5 kg, so a first purchase is a working quantity rather than a single jar. We are ISO 9001:2015 certified. Halal, Kosher, US FDA registration, SGS, RoHS and REACH documentation is provided on request; ask for what your market needs when you enquire.

A custom sample pack is available for evaluation if you want to test the carrier against your own resin before committing to the minimum. The full selection, with carriers and color names side by side, is in the catalog: Color Pastes (No. 39).

Frequently Asked Questions

Can water-based paste go into epoxy? No. Water-based grades are built for waterborne systems and are used as supplied or thinned with water. For epoxy, take the solvent-based or the epoxy matte grade.

Can the two carriers be mixed? They are not blended together. Each jar belongs to the system its carrier was chosen for, and crossing them defeats the reason the carrier is specified.

Will it affect cure? Cure problems usually trace back to addition level or uneven mixing rather than the paste itself. Trial on your own batch, and check loading and mixing before changing anything else.

Tell us the resin system you are pouring and the finish you want — metallic through-depth or opaque matte — and we will point you to the carrier that fits it. Samples available for evaluation on request.

Dejar un mensaje
Si le interesan nuestros productos y desea obtener más información, deje un mensaje aquí y le responderemos lo antes posible.

Productos relacionados

rainbow violet crystal pigment
Pigmento XiallicSparks violeta arcoíris KT-T60-22-WR

KT-T60-22-WR Rainbow Violet XiallicSparks es nuestro equivalente directo a Xirallic T60-22, un pigmento de efecto violeta de Al₂O₃ con sustrato de escamas de óxido de aluminio en lugar de mica. Con un índice de refracción de 1,76 y un tamaño de partícula de 6 a 30 μm, produce el brillo cristalino nítido y facetado que caracteriza los acabados de pintura base de alta gama para automóviles. Mientras que los pigmentos a base de mica ofrecen un brillo suave y difuso, este pigmento proporciona reflejos intensos y brillantes, con una croma y pureza de color excepcionales, en un efecto violeta arcoíris.

LEER MÁS
xirallic replacement galaxy blue
Pigmento azul galaxia de repuesto Xirallic KT-T60-23-WR

KT-T60-23-WR es nuestro material a base de alúmina.Galaxia azul de reemplazo xirállico Pigmento diseñado como una alternativa directa al Merck Xirallic T60-23. Fabricado sobre un sustrato de cristal de Al₂O₃ de alto índice de refracción (IR 1,76) con un rango de partículas de 6 a 30 μm, ofrece un brillo azul facetado y cristalino en los sistemas de pintura base para automóviles, con una profundidad y un brillo que los pigmentos a base de mica no pueden igualar estructuralmente.

LEER MÁS
xirallic equivalent rainbow green
Pigmento XiallicSparks verde arcoíris KT-T60-25-WR

KT-T60-25-WR es un pigmento de efecto cristalino de alúmina (Al₂O₃) de nuestra serie XiallicSparks, que produce un brillo verde arcoíris intenso con el tipo de carácter facetado y de alto brillo que se observa en los acabados OEM de alta gama para automóviles. Con un rango de tamaño de partícula de 6 a 30 μm y un índice de refracción del sustrato de Al₂O₃ de 1,76 —significativamente superior al de la mica estándar—, este pigmento verde arcoíris de Al₂O₃ ofrece una croma y claridad excepcionales en sistemas de capa base/capa transparente, a precio de fábrica.

LEER MÁS
xirallic equivalent rainbow purple
Pigmento XiallicSparks morado arcoíris KT-T60-26-WR

KT-T60-26-WR Rainbow Purple es un pigmento de efecto cristalino a base de alúmina de nuestra serie XiallicSparks, que produce un vívido brillo púrpura arcoíris en sistemas de pintura base-capa transparente para automóviles. Fabricado sobre un sustrato de escamas de Al₂O₃ (no mica), ofrece mayor croma, reflejos más nítidos y una mejor orientación de las escamas que los pigmentos perlados convencionales. Con un rango de tamaño de partícula de 6 a 30 μm y un D50 de 9 a 11 μm, está diseñado específicamente para aplicaciones de alta gama en la industria automotriz, tanto para fabricantes de equipos originales (OEM) como para repintado, donde se busca un brillo púrpura distintivo, similar al de un cristal.

LEER MÁS
xirallic equivalent pigments
Pigmento XiallicSparks al por mayor para recubrimientos automotrices y acabados industriales.

XiallicSparks es la línea de pigmentos con efecto de óxido de aluminio de Kolortek, disponible a granel. Diseñada como alternativa directa a Merck Xirallic® para fabricantes de equipos originales (OEM) del sector automotriz y aplicaciones de recubrimientos industriales de alta gama. Con una base de escamas de Al₂O₃ en lugar de mica, esta serie ofrece el brillo facetado y cristalino que caracteriza los acabados automotrices de alta gama, a precios directos de fábrica que suelen ser entre un 20 % y un 40 % inferiores a los de los productos equivalentes de Merck con un rendimiento comparable. Si está evaluando un proveedor mayorista alternativo de Xirallic, esta es la línea de productos que debe considerar.

LEER MÁS
aluminum oxide pigment
Pigmento equivalente a Xirallic, suministro directo de fábrica.

Si estás buscando unEquivalente de Xirallic, venta directa de fábrica Si necesita el mismo sustrato de cristal de óxido de aluminio que impulsa el característico brillo facetado de Merck Xirallic, la serie XiallicSparks de Kolortek (códigos de producto KT-T60 y KT-F60) ofrece ese efecto a un costo entre un 20 % y un 40 % menor que los equivalentes de marca. Con once grados que abarcan colores desde Plata Galaxia hasta Cobre Llama, tamaños de partícula de 6 a 30 μm y suministro directo de fábrica desde nuestra planta de fabricación en China, estas son alternativas diseñadas específicamente para formuladores de recubrimientos automotrices que buscan rendimiento sin el precio de Merck.

LEER MÁS